Shop All

Rune Tactical - Spring/Follower - CZ P10C or F (140mm)

Rune Tactical kits use a low-profile follower and a re-designed spring to make better use of the space inside the magazine. We’re seeing shooters report as much as 24+1 in certain 9mm magazine setups (extended SIG 320, Walther PPQ, etc. . ). adds...

Rune Tactical - Spring/Follower - Glock RT11 (for +5/6)

Rune Tactical kits use a low-profile follower and a re-designed spring to make better use of the space inside the magazine. We’re seeing shooters report as much as 24+1 in certain 9mm magazine setups (extended SIG 320, Walther PPQ, etc. . ). adds...

Rune Tactical - Spring/Follower - Canik/Beretta RT13 (for +9)

Rune Tactical kits use a low-profile follower and a re-designed spring to make better use of the space inside the magazine. We’re seeing shooters report as much as 24+1 in certain 9mm magazine setups (extended SIG 320, Walther PPQ, etc. . ). adds...

Rune Tactical - Spring/Follower - Canik/Beretta RT11 (for +4)

Rune Tactical kits use a low-profile follower and a re-designed spring to make better use of the space inside the magazine. We’re seeing shooters report as much as 24+1 in certain 9mm magazine setups (extended SIG 320, Walther PPQ, etc. . ). adds...

Rune Tactical - Spring/Follower - Walther RT11 (for +6)

Rune Tactical kits use a low-profile follower and a re-designed spring to make better use of the space inside the magazine. We’re seeing shooters report as much as 24+1 in certain 9mm magazine setups (extended SIG 320, Walther PPQ, etc. . ). adds...

Rock Island 5.0 140mm Basepad - Red

Expand your capacity to the maximum allowed! Adds +4 capacity Replaces the factory spring with a longer, stronger one Meets the USPSA "Limited Division" 140mm requirements. Machined from bar stock Easy on/off using our simple, single-screw retention...

Rock Island 5.0 140mm Basepad - Brass

Expand your capacity to the maximum allowed! Adds +4 capacity Replaces the factory spring with a longer, stronger one Meets the USPSA "Limited Division" 140mm requirements. Machined from bar stock Easy on/off using our simple, single-screw retention...

Rock Island 5.0 140mm Basepad - Shiny Aluminum

Expand your capacity to the maximum allowed! Adds +4 capacity Replaces the factory spring with a longer, stronger one Meets the USPSA "Limited Division" 140mm requirements. Machined from bar stock Easy on/off using our simple, single-screw retention...

Seattle Snail for Gen 2/3 Glock 17 - Brass - Black

Way back in the early 1990s when we first introduced the Seattle Slug, we offered it in both a "regular" and a "concealment" model. The "regular" model came out first, and we offered the "concealment" model as a custom product. As it happens, the...

Seattle Snail for Gen 2/3 Glock 17 - Shiny Brass

Way back in the early 1990s when we first introduced the Seattle Slug, we offered it in both a "regular" and a "concealment" model. The "regular" model came out first, and we offered the "concealment" model as a custom product. As it happens, the...

Canik Back Plate for TP9, SF, SFX, Others - FDE

Add a bit of splash and style to your Canik. This easy to install replacement back plate is made of aluminum and is finished with a light and grippy checkered pattern. Available in black, blue, Cerakote gold, orange, red and tungsten. Improved texture...

Canik Back Plate for Mete/Rival, Elite, and Elte SC - FDE

Add a bit of splash and style to your Canik. This easy to install replacement back plate is made of aluminum and is finished with a light and grippy checkered pattern. Available in black, blue, gold, orange, red, tungsten and FDE. Improved texture helps...

Canik Signature Plus 4 - Aluminum - Tungsten

TF "Signature" parts add modern design features to our classic TF designs. Where the "Classic" series offers a smooth, clean look/feel, the "Signature" line includes a built-in rip strip, additional weight-relief cuts, non-reflective matte finishes, and...

Glock 41 +1 - FDE w/spring for Glock

RIDICULOUS CAPACITY! Add our extension kit to your Glock 31/33-round magazine and transform it into a giggle-worthy 41+1 round BIG stick. This is the same extension as our well-known 170mm +12 but it ships with a crazy-long machine-pistol spring...

Glock +12 for 9mm - FDE w/spring for Glock

MAXIMUM FIREPOWER! Our updated 170mm floorplate offers up to +12. We optimized for 9mm in this revision, giving 9mm "Open gun" drivers a chance to load TWENTY NINE and one in most cases. We've also re-profiled the interior to better accommodate the new...

Canik Elite Carry Magwell - Aluminum - Tungsten

Concealed Speed! Finally, an easy to install carry magwell for the Canik Elite. Adds an expanded magwell that is designed for concealed carry Requires NO MODIFICATIONS Fits Canik Elite Combat and Elite Executive Weight: .25 ouncesMaterial:...

GGI P365 Basepad - Black

GGI's custom SIG Sauer® P365 Magazine Base Pads are a hard-duty replacement for your magazines. Made from 6061 Aluminum and professionally finished with MIL-A-8625 Type III anodized coating. These upgrades are for the P365...

Canik Elite Carry Kit - Brass - Tungsten

Maximize your Canik Elite with our concealment kit -- and save! Kit includes: 1 Brass Elite Carry magwell 1 Brass Elite backstrap 1 Brass +4 basepad 1 Brass +0 basepad Weight: variable Material: Brass Color: Black NOTE: Due to state department...

Gray Guns / TF 320 for 10mm - 140mm Baseapad - Hard Ano Black

GrayGuns + Taylor Freelance = Awesome +4/5 capacity -- re-designed for the 10mm! rock-solid retention with easy takedown USPSA 140mm Legal Grayguns recently asked us to adapt the TF/GGI 140mm "Comp 5" for use with their hot new SIG 320 in 10mm. Since...

GGI320 - Brass - Basepad for Sig 320

Designed to be repeatedly dropped on concrete or asphalt hundreds of times, they are a perfect upgrade for the OEM plastic base pads. Appropriate for competition and shooting enthusiasts looking for a quality, durable upgrade. Backwards compatible with...

Walther PDP Full-Size Heavyweight Kit - Brass - Black

The TF magwell for the PDP offers a sleek, cost-effective way to get the most out of your pistol. Combined with the TF metal backstrap, the system: lowers the center of gravity (for better handling) increases mass (for softer recoil) makes reloading much...

CZ P10 "C" Backstrap - Brass - Black

P10 Drivers! Lower the center of gravity on your P10C and slow down the recoil impulse. Stonebridge Gunworks (which specializes in P10s) asked us to mass-produce this part for their clients, replacing a backstrap that they'd been producing in small...

CZ P10 "C" Backstrap - Brass

P10 Drivers! Lower the center of gravity on your P10C and slow down the recoil impulse. Stonebridge Gunworks (which specializes in P10s) asked us to mass-produce this part for their clients, replacing a backstrap that they'd been producing in small...

CZ P10 "C" Backstrap - Aluminum - Black

P10 Drivers! Lower the center of gravity on your P10C and slow down the recoil impulse. Stonebridge Gunworks (which specializes in P10s) asked us to mass-produce this part for their clients, replacing a backstrap that they'd been producing in small...