Shop All

CZ P10F Kit - Brass - Shiny

Kit includes: 2x P10F +3/4 brass Basepads - Shiny 1x P10F brass Magwell - Shiny 1x P10F brass Backstrap - Shiny   WARNING! This product contains chemicals known to the state of California to cause...

CZ P10 F Magwell - Brass - Shiny

Our CZ P10F magwell expands the P10’s relatively narrow magwell opening into a big,  smooth funnel that guides magazines in remarkably well. (With a little practice, you should be able to reload...

CZ P10 F Magwell - Alum - Black

Our CZ P10F magwell expands the P10’s relatively narrow magwell opening into a big,  smooth funnel that guides magazines in remarkably well. (With a little practice, you should be able to reload...

CZ P10 F Magwell - Alum - Shiny

Our CZ P10F magwell expands the P10’s relatively narrow magwell opening into a big,  smooth funnel that guides magazines in remarkably well. (With a little practice, you should be able to reload...

Glock 10mm/.45 Compeititon Basepad - Alum - Shiny

Machined aluminum basepad extends the magazine to make it much easier to load and manipulate. It weighs a full ounce (compared to a few grams for the stock basepad) which helps the magazine fall...

UZI SMG +10 - Shiny Aluminum

Transform your famous UZI 32-round magazines into 42+1+ super-capacity mags with the addition of a Taylor Freelance +10 extension. IWI-built UZI mags ship with a strong-enough magazine spring to work...

Grams Spring/Follower Kit, FKCK-11, for Canik TP9, 18 round MecGar mag

11 coil spring for Canik (TP9) 9mm 18 round mecgar mags. NOTE: Will not activate slide-lock

Grams - Spring/Follower Kit, FKHK-11, for HK P30

11-coil spring for HK P30 9mm magazines.

Arredondo Follower - .38 - .40 - .45

- Improve overall reliability and feeding - Fits Para-Ordnance, Kimber, BUL MS, Rock Island high cap mags - Works with .38 Super, .40 S&W, .45 ACP - Only works with Arredondo spring - DOES NOT LOCK...

Glock 9/.40 Competition Basepad - Aluminum

Zombie +3 Basepad for PMAG - Blue

The Zombie 3 is our next generation of "Zombie" basepad, first created for the Zombie Apocalypse 3-Gun Match back in 2016. The new model offers toolless disassembly (no screws or posts). The hollow...

Zombie +3 Basepad for PMAG - Red

The Zombie 3 is our next generation of "Zombie" basepad, first created for the Zombie Apocalypse 3-Gun Match back in 2016. The new model offers toolless disassembly (no screws or posts). The hollow...

Zombie +3 Basepad for PMAG - Black

The Zombie 3 is our next generation of "Zombie" basepad, first created for the Zombie Apocalypse 3-Gun Match back in 2016. The new model offers toolless disassembly (no screws or posts). The hollow...

CZ P10 "F+C," CZ P09C, DWX +3 Basepad - Brass - Black

Adds +3 without adding much length Works with factory spring (saves you money!) BONUS! Built to fit the overall length requirements of USPSA “Limited,” “Carry Optics,” and various 3-Gun matches...

HK VP9 A1 K Death Grip Backstrap - Brass - Black

Get a "Death Grip" on that gun! It all started when Nils Jonasson (pro shooter for Canik) asked us to increase the amount of checkering on his TF backstrap. He likes to maintain a "death grip" on his...

HK VP9 A1 K Death Grip Backstrap - Brass - Shiny

Get a "Death Grip" on that gun! It all started when Nils Jonasson (pro shooter for Canik) asked us to increase the amount of checkering on his TF backstrap. He likes to maintain a "death grip" on his...

HK VP9 A1 Magwell - Brass - Black

AT LAST! Taylor Freelance offers a purpose-built “snap-on” magwell for the new HK VP9 A1 series. Meaningfully wider and deeper than the already-generous factory magwell, this one offers the ease of...

HK VP9 A1 Magwell - Brass - Shiny

AT LAST! Taylor Freelance offers a purpose-built “snap-on” magwell for the new HK VP9 A1 series. Meaningfully wider and deeper than the already-generous factory magwell, this one offers the ease of...

HK VP9 A1 Magwell - Alum - Black

AT LAST! Taylor Freelance offers a purpose-built “snap-on” magwell for the new HK VP9 A1 series. Meaningfully wider and deeper than the already-generous factory magwell, this one offers the ease of...

HK VP9 A1 Magwell - Alum - Shiny

AT LAST! Taylor Freelance offers a purpose-built “snap-on” magwell for the new HK VP9 A1 series. Meaningfully wider and deeper than the already-generous factory magwell, this one offers the ease of...

HK VP9 Death Grip Backstrap - Large - Brass - Black

Get a "Death Grip" on that gun! It all started when Nils Jonasson (pro shooter for Canik) asked us to increase the amount of checkering on his TF backstrap. He likes to maintain a "death grip" on his...

HK VP9 Death Grip Backstrap - Large - Brass - Shiny

Get a "Death Grip" on that gun! It all started when Nils Jonasson (pro shooter for Canik) asked us to increase the amount of checkering on his TF backstrap. He likes to maintain a "death grip" on his...

UZI SMG +10 Basepad - Alum - Black

Transform your famous UZI 32-round magazines into 42+1+ super-capacity mags with the addition of a Taylor Freelance +10 extension. IWI-built UZI mags ship with a strong-enough magazine spring to work...

GGI/TF HK VP9/40 +0 Competition Basepad - Alum - Black

Taylor Freelance took the lead on expanding the GGI/TF "Hard Duty" project into the HK VP series. Price is for one part. Collaborative project between Grayguns and TF design teams Side rails allow...