Shop All

Grams Spring/Follower Kit, FKK9-11, Tanfoglio 140MM K-TYPE 9MM,

Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The...

Grams Spring/Follower Kit, FKK40-11, TANFOGLIO 140MM K-TYPE 40 S&W

Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The...

Grams Spring/Follower Kit, FKK38-11, Tangfolio 140MM Long Format

Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the standard (long format) Tanfoglio magazine with NO spacer plate down the...

TF/Wolff SPRING FOR Glock +5, Walther +3, +6 (12-coil G-pattern)

Replacement spring for the Glock +5 140mm floorplate (works in 9mm, .40 S&W, and .357 SIG guns). Also works for Walther PPQ +6. Brown in color, longer than stock, custom-made for us by Wolff...

TF/Wolff SPRING FOR GLOCK +4 (.45ACP) 140MM FLOORPLATE (12-coil .45)

Replacement spring for the Glock +4 140mm floorplate (works in .45 ACP guns only). Brown in color, longer than stock, custom-made for us by Wolff Gunsprings. Due to U.S. State Department...

Grams Spring/Follower Kit, FKXM-11, 140MM XDM

Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the 9/.40 Springfield XDM magazine. The attached spring has 11 coils, and is...

TF/Wolff SPRING FOR 140MM XDM (12-coil XDM)

Custom-made for us by Wolff Gunsprings, our springs are heavier and longer than stock, providing optimal function with the stock magazine parts (including positive slide lock-back).

Grams Spring/Follower Kit, FKC-11, 140MM CZ-75 Small Frame, SP01

Grams spring for 140mm magazines (Limited division) for Tanfoglio and CZ small-frame pistols. (9mm, .40) Typically these provide +1 capacity, but the slide will not lock back on the last shot.   *...

Grams Spring/Follower Kit, FKCMG11,140MM Mec-Gar CZ-75 SML Frame, SP01

Made especially for the MEC-GAR aftermarket magazine for small-frame CZ-75's (including the SP01). Made by Grams Engineering, these provide maximum capacity and optimal spring strength for our +5+...

Grams Spring/Follower Kit, FKCL-11, 140MM CZ Tac Sport

Made especially for CZ Tactical Sport by Grams Engineering, these provide maximum capacity and optimal spring strength for our extensions.  Typically these provide +1 capacity, but the slide will not...

PATCH, DARK TRIANGLE

Our "dark triangle" patch juices up a uniform, shooting bag, or other piece of gear. 3" wide, sew-on style.

Spare Parts - Floorplate Spares Kit

Designed for basepads using our locking plate system. Includes 5 spare screws 2 spare retaining plates Allen wrench to match your equipment. In the "special instructions" field at checkout, please...

SPP Training Target - Large

Face the four SPP courses without going to the range! Our SPP dry-fire training poster lays out the targets for you "as they would look from the shooters' box." Stand 6 feet back, and all the...

SPP Training Target - Half Size

Face the four SPP courses without going to the range! Our SPP dry-fire training poster lays out the targets for you "as they would look from the shooters' box." Stand 3 feet back, and all the...

Carver Magwell - Glock 17/22/34/35/31 - Open - GEN 3 - Black

If you want a full-on competition magwell, the Carver Custom is one of the best. Secured to the gun in two ways, the Carver uses a brass mounting point (basically a miniaturized Seattle Slug) to...

Carver Magwell - Glock 21/20/40/41 - Tactical - Gen 4 - Black

If you want a full-on competition magwell, the Carver Custom is one of the best. Secured to the gun in two ways, the Carver uses an aluminum, mounting point (basically a miniaturized Seattle Slug) to...

Carver Magwell - Glock 17/22/34/35/31 - Open - Gen 4 - Stainless Steel

If you want a full-on competition magwell, the Carver Custom is one of the best. Secured to the gun in two ways, the Carver uses a brass mounting point (basically a miniaturized Seattle Slug) to...

Carver Magwell - Glock 17/22/34/35/31 - Open - Gen 3 - Stainless Steel

If you want a full-on competition magwell, the Carver Custom is one of the best. Secured to the gun in two ways, the Carver uses a brass mounting point (basically a miniaturized Seattle Slug) to...

Sight Block For Glock 9mm - Alum - Black

Convert your Glock 17 to an extended-barrel racegun with our Glock sight block. Designed to run with the Lone Wolf threaded barrel for the Glock 34, the sight block instantly gives your standard...

Nine Lives of an Alaskan Bush Pilot

Ken Eichner's matchless memoir on the early days of helicopter aviation in Alaska.

S&W M&P IPSC +3 Basepad - Alum - Black

USPSA President-elect Phil Strader worked with us to create this 129.5mm floorplate for IPSC "Standard Division" a while back. He used our floorplates with his mods to earn his slot on the US...

+10 .40 Pistol Basepad w/spring for Glock - Delrin

MAXIMUM FIREPOWER! We tweaked our popular 170mm "+8" extension for 40 S&W, giving you a chance to load up to TEN additional rounds! That 25+1! We've also re-profiled the interior to better...

41 +1 Basepad w/spring for Glock - Alum - Black

RIDICULOUS CAPACITY! Add our extension kit to your Glock 31/33-round magazine and transform it into a giggle-worthy 41+1 round BIG stick. This is the same extension as our well-known 170mm +12 but it...

+4 .45 Basepad w/spring for Glock - Delrin

Extend your Glock 21/41 from 13, to a full 17 rounds of firepower! Built for USPSA's "Limited" Division, the finished magazine is 140mm long, as measured down the back (versus about 120mm stock)...