Shop All

+12 9mm Basepad w/spring for Glock - Delrin

MAXIMUM FIREPOWER! Our updated 170mm floorplate offers up to +12. We optimized for 9mm in this revision, giving 9mm "Open gun" drivers a chance to load TWENTY NINE and one in most cases. We've also re-profiled the interior to better accommodate the new...

+12 9mm Basepad w/spring for Glock - Alum - Blue

MAXIMUM FIREPOWER! Our updated 170mm floorplate offers up to +12. We optimized for 9mm in this revision, giving 9mm "Open gun" drivers a chance to load TWENTY NINE and one in most cases. We've also re-profiled the interior to better accommodate the new...

+12 9mm Basepad w/spring for Glock - Alum - Black

MAXIMUM FIREPOWER! Our updated 170mm floorplate offers up to +12. We optimized for 9mm in this revision, giving 9mm "Open gun" drivers a chance to load TWENTY NINE and one in most cases. We've also re-profiled the interior to better accommodate the new...

GRAMS SPRING/FOLLOWER KIT, FKK9-13, 170MM TANFOGLIO K-TYPE

Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The attached spring has 13 coils, and is intended for magazines...

GRAMS SPRING/FOLLOWER KIT, FKK9-11, TANFOGLIO 140MM K-TYPE 9MM,

Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The attached spring has 11 coils, and is intended for magazines...

GRAMS SPRING/FOLLOWER KIT, FKK40-11, TANFOGLIO 140MM K-TYPE 40 S&W

Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The attached spring has 11 coils, and is intended for magazines...

GRAMS SPRING/FOLLOWER KIT, FKK38-11, TANFOGLIO 140MM LONG FORMAT

Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the standard (long format) Tanfoglio magazine with NO spacer plate down the back. The attached spring has 11 coils, and is intended...

Wolff Spring for CZ +5

The CZ75 SP01 can use springs intended for the Glock. The spring we offer is the same one we offer for our Glock 140mm basepads -- heavier than stock, longer than stock, custom-wound for us by Wolff Gunsprings. *Due to US State Department restrictions,...

TF/Wolff SPRING FOR Glock +5, Walther +3, +6 (12-coil G-pattern)

Replacement spring for the Glock +5 140mm floorplate (works in 9mm, .40 S&W, and .357 SIG guns). Also works for Walther PPQ +6. Brown in color, longer than stock, custom-made for us by Wolff Gunsprings. Due to U.S. State Department restrictions, we...

TF/Wolff SPRING FOR GLOCK +4 (.45ACP) 140MM FLOORPLATE (12-coil .45)

Replacement spring for the Glock +4 140mm floorplate (works in .45 ACP guns only). Brown in color, longer than stock, custom-made for us by Wolff Gunsprings. Due to U.S. State Department restrictions, we cannot ship this part internationally.

GRAMS SPRING/FOLLOWER KIT, FKXM-11, 140MM XDM

Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the 9/.40 Springfield XDM magazine. The attached spring has 11 coils, and is intended for magazines up to 140 mm overall length...

TF/Wolff SPRING FOR 140MM XDM (12-coil XDM)

Custom-made for us by Wolff Gunsprings, our springs are heavier and longer than stock, providing optimal function with the stock magazine parts (including positive slide lock-back).

GRAMS SPRING/FOLLOWER KIT, FKC-11, 140MM CZ-75 SMALL FRAME, SP01

Grams spring for 140mm magazines (Limited division) for Tanfoglio and CZ small-frame pistols. (9mm, .40) Typically these provide +1 capacity, but the slide will not lock back on the last shot.   * Due to State Department restrictions we cannot ship...

GRAMS SPRING/FOLLOWER KIT, FKCMG11,140MM MEC-GAR CZ-75 SML FRAME, SP01

Made especially for the MEC-GAR aftermarket magazine for small-frame CZ-75's (including the SP01). Made by Grams Engineering, these provide maximum capacity and optimal spring strength for our +5+ extensions. Note: Mec-Gar magazines are very slightly...

GRAMS SPRING/FOLLOWER KIT, FKCL-11, 140MM CZ TAC SPORT

Made especially for CZ Tactical Sport by Grams Engineering, these provide maximum capacity and optimal spring strength for our extensions.  Typically these provide +1 capacity, but the slide will not lock back on the last shot.* Due to State...

PATCH, DARK TRIANGLE

Our "dark triangle" patch juices up a uniform, shooting bag, or other piece of gear. 3" wide, sew-on style.

Spare Parts - Floorplate Spares Kit

Designed for basepads using our locking plate system. Includes 5 spare screws 2 spare retaining plates Allen wrench to match your equipment. In the "special instructions" field at checkout, please specify which basepad you need parts for.

SPP Training Targe - Large - Laminated

Normally, laminating big posters = big costs, but TF made a deal that cut costs down to size. We're passing that bulk savings on to you, creating a tremendous value compared to typical copy shops. Our SPP dry-fire training poster lays out the targets for...

SPP Training Target - Large

Face the four SPP courses without going to the range! Our SPP dry-fire training poster lays out the targets for you "as they would look from the shooters' box." Stand 6 feet back, and all the visuals, distances, and angles are correct. Massive 60" by 36"...

SPP Training Target - Half Size

Face the four SPP courses without going to the range! Our SPP dry-fire training poster lays out the targets for you "as they would look from the shooters' box." Stand 3 feet back, and all the visuals, distances, and angles are correct. This half-size...

Carver Magwell - Glock 17/22/34/35/31 - Open - GEN 3 - Black

If you want a full-on competition magwell, the Carver Custom is one of the best. Secured to the gun in two ways, the Carver uses a brass mounting point (basically a miniaturized Seattle Slug) to provide weight where you need it. The aluminum version...

Carver Magwell - Glock 21/20/40/41 - Tactical - Gen 4 - Black

If you want a full-on competition magwell, the Carver Custom is one of the best. Secured to the gun in two ways, the Carver uses an aluminum, mounting point (basically a miniaturized Seattle Slug) to provide weight where you need it. The aluminum version...

Carver Magwell - Glock 17/22/34/35/31 - Open - Gen 4 - Stainless Steel

If you want a full-on competition magwell, the Carver Custom is one of the best. Secured to the gun in two ways, the Carver uses a brass mounting point (basically a miniaturized Seattle Slug) to provide weight where you need it. The aluminum version...

Carver Magwell - Glock 17/22/34/35/31 - Open - Gen 3 - Stainless Steel

If you want a full-on competition magwell, the Carver Custom is one of the best. Secured to the gun in two ways, the Carver uses a brass mounting point (basically a miniaturized Seattle Slug) to provide weight where you need it. The aluminum version...