CZ

CZ P10C 140mm +7 Blue

MASSIVE capacity increase short enough to conceal as a second magazine. If you’re looking to add SERIOUS capacity to the hot new CZ P10C, this is your part. BONUS! Built to fit the overall length requirements of USPSA “Limited,”...

CZ-75 +5 Basepad - Aluminum

Push your mags out to the maximum overall length allowed in 3-Gun with our extensions. Legal for USPSA and 3-Gun matches alike, these extensions DO NOT come off in use, yet are easy to disassemble with the help of a large Allen key. Design derives...

CZ-75 Signature Series +5 - Brass - Black

TF "Signature" parts add modern design features to our classic TF designs. Where the "Classic" series offers a smooth, clean look/feel, the "Signature" line includes a built-in rip strip, additional weight-relief cuts, non-reflective matte finishes, and...

CZ P10 "F" Backstrap - Alum Black

P10 Drivers! Lower the center of gravity on your P10F and slow down the recoil impulse. Stonebridge Gunworks (which specializes in P10s) asked us to mass-produce this part for their clients, replacing a backstrap that they'd been producing in small...

Rune Tactical - Spring/Follower - CZ P10C or F (140mm)

Rune Tactical kits use a low-profile follower and a re-designed spring to make better use of the space inside the magazine. We’re seeing shooters report as much as 24+1 in certain 9mm magazine setups (extended SIG 320, Walther PPQ, etc. . ). adds...

CZ P10 "C" Backstrap - Brass - Black

P10 Drivers! Lower the center of gravity on your P10C and slow down the recoil impulse. Stonebridge Gunworks (which specializes in P10s) asked us to mass-produce this part for their clients, replacing a backstrap that they'd been producing in small...

CZ P10 "C" Backstrap - Brass

P10 Drivers! Lower the center of gravity on your P10C and slow down the recoil impulse. Stonebridge Gunworks (which specializes in P10s) asked us to mass-produce this part for their clients, replacing a backstrap that they'd been producing in small...

CZ P10 "C" Backstrap - Aluminum - Black

P10 Drivers! Lower the center of gravity on your P10C and slow down the recoil impulse. Stonebridge Gunworks (which specializes in P10s) asked us to mass-produce this part for their clients, replacing a backstrap that they'd been producing in small...

CZ P10 "C" Backstrap - Aluminum

P10 Drivers! Lower the center of gravity on your P10C and slow down the recoil impulse. Stonebridge Gunworks (which specializes in P10s) asked us to mass-produce this part for their clients, replacing a backstrap that they'd been producing in small...

CZ P10 "F" Backstrap - Aluminum

P10 Drivers! Lower the center of gravity on your P10F and slow down the recoil impulse. Stonebridge Gunworks (which specializes in P10s) asked us to mass-produce this part for their clients, replacing a backstrap that they'd been producing in small...

CZ P10 F Backstrap - Brass - Black

P10 Drivers! Lower the center of gravity on your P10F and slow down the recoil impulse. Stonebridge Gunworks (which specializes in P10s) asked us to mass-produce this part for their clients, replacing a backstrap that they'd been producing in small...

CZ P10 F Backstrap - Brass

P10 Drivers! Lower the center of gravity on your P10F and slow down the recoil impulse. Stonebridge Gunworks (which specializes in P10s) asked us to mass-produce this part for their clients, replacing a backstrap that they'd been producing in small...

Grams Spring/Follower Kit, FKCL-13, CZ Large frame, upto 171mm mag

Follower Kit for CZ Large fram 9mm/.40 mags (Tactical Sport/CZechmate). Designed for mag OAL that measure up to 171mm long, (includes Grams Format Follower (CL) & 13 coil spring.

CZ-75 +5 Basepad - Orange

Push your mags out to the maximum overall length allowed in 3-Gun with our extensions. Legal for USPSA and 3-Gun matches alike, these extensions DO NOT come off in use, yet are easy to disassemble with the help of a large Allen key. Design derives...

CZ-75 SIGNATURE Series +5 - Orange

TF "Signature" parts add modern design features to our classic TF designs. Where the "Classic" series offers a smooth, clean look/feel, the "Signature" line includes a built-in rip strip, additional weight-relief cuts, non-reflective matte finishes, and...

CZ TacSport +3 Basepad - Brass

For the CZ "Standard IPSC" and "Tactical Sport" (not for the standard-frame CZ75, CZ85, or CZSP01). Provides +2 or +3 rounds, depending on which follower you're using. Works particularly well with the Grams Engineering spring/follower kit.  Weight:...

CZ-75 SIGNATURE Series +5 - Blue

TF "Signature" parts add modern design features to our classic TF designs. Where the "Classic" series offers a smooth, clean look/feel, the "Signature" line includes a built-in rip strip, additional weight-relief cuts, non-reflective matte finishes, and...

CZ-75 SIGNATURE Series +5 - Black

TF "Signature" parts add modern design features to our classic TF designs. Where the "Classic" series offers a smooth, clean look/feel, the "Signature" line includes a built-in rip strip, additional weight-relief cuts, non-reflective matte finishes, and...

CZ-75 SIGNATURE Series +5 - Aluminum

TF "Signature" parts add modern design features to our classic TF designs. Where the "Classic" series offers a smooth, clean look/feel, the "Signature" line includes a built-in rip strip, additional weight-relief cuts, non-reflective matte finishes, and...

CZ-75 SIGNATURE Series +5 - Brass

TF "Signature" parts add modern design features to our classic TF designs. Where the "Classic" series offers a smooth, clean look/feel, the "Signature" line includes a built-in rip strip, additional weight-relief cuts, non-reflective matte finishes, and...

CZ-75 +5 Basepad - Brass

Push your mags out to the maximum overall length allowed in 3-Gun with our extensions. Legal for USPSA and 3-Gun matches alike, these extensions DO NOT come off in use, yet are easy to disassemble with the help of a large Allen key. Design derives...

CZ P10 "F+C," DWX +3 - Brass

Adds +3 without adding much length Works with factory spring (saves you money!) BONUS! Built to fit the overall length requirements of USPSA “Limited,” “Carry Optics,” and various 3-Gun matches.  Based on our popular line...

WOLFF SPRING for +3 to +5 Canik, M&P, Old HK VP9/P30, HK 45 140mm extensions

Replacement spring for +3 to +5 Canik, M&P, Old HK VP9/P30, and HK 45 . (USPSA shooters, if you have 140mm mags, this is the spring you're looking for.) Custom made for TF by Wolff Gunsprings. Due to U.S. State Department restrictions, we cannot ship...

CZ P10 "F+C," DWX +3 - Red

Adds +3 without adding much length Works with factory spring (saves you money!) BONUS! Built to fit the overall length requirements of USPSA “Limited,” “Carry Optics,” and various 3-Gun matches.  Based on our popular line...