Springs

TF/Wolff Spring for CZ +5 (12-coil M-pattern)

The CZ75 SP01 can use springs intended for the Glock. The spring we offer is the same one we offer for our Glock 140mm basepads -- heavier than stock, longer than stock, custom-wound for us by Wolff Gunsprings. *Due to US State Department restrictions,...

GRAMS SPRING/FOLLOWER KIT, FKK9-11, TANFOGLIO 140MM K-TYPE 9MM,

Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The attached spring has 11 coils, and is intended for magazines...

GRAMS SPRING/FOLLOWER KIT, FKK40-11, TANFOGLIO 140MM K-TYPE 40 S&W

Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The attached spring has 11 coils, and is intended for magazines...

GRAMS SPRING/FOLLOWER KIT, FKK38-11, TANFOGLIO 140MM LONG FORMAT

Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the standard (long format) Tanfoglio magazine with NO spacer plate down the back. The attached spring has 11 coils, and is intended...

Wolff Spring for CZ +5

The CZ75 SP01 can use springs intended for the Glock. The spring we offer is the same one we offer for our Glock 140mm basepads -- heavier than stock, longer than stock, custom-wound for us by Wolff Gunsprings. *Due to US State Department restrictions,...

TF/Wolff SPRING FOR Glock +5, Walther +3, +6 (12-coil G-pattern)

Replacement spring for the Glock +5 140mm floorplate (works in 9mm, .40 S&W, and .357 SIG guns). Also works for Walther PPQ +6. Brown in color, longer than stock, custom-made for us by Wolff Gunsprings. Due to U.S. State Department restrictions, we...

GRAMS SPRING/FOLLOWER KIT, FKXM-11, 140MM XDM

Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the 9/.40 Springfield XDM magazine. The attached spring has 11 coils, and is intended for magazines up to 140 mm overall length...

TF/Wolff SPRING FOR 140MM XDM (12-coil XDM)

Custom-made for us by Wolff Gunsprings, our springs are heavier and longer than stock, providing optimal function with the stock magazine parts (including positive slide lock-back).

GRAMS SPRING/FOLLOWER KIT, FKC-11, 140MM CZ-75 SMALL FRAME, SP01

Grams spring for 140mm magazines (Limited division) for Tanfoglio and CZ small-frame pistols. (9mm, .40) Typically these provide +1 capacity, but the slide will not lock back on the last shot.   * Due to State Department restrictions we cannot ship...

GRAMS SPRING/FOLLOWER KIT, FKCMG11,140MM MEC-GAR CZ-75 SML FRAME, SP01

Made especially for the MEC-GAR aftermarket magazine for small-frame CZ-75's (including the SP01). Made by Grams Engineering, these provide maximum capacity and optimal spring strength for our +5+ extensions. Note: Mec-Gar magazines are very slightly...

GRAMS SPRING/FOLLOWER KIT, FKCL-11, 140MM CZ TAC SPORT

Made especially for CZ Tactical Sport by Grams Engineering, these provide maximum capacity and optimal spring strength for our extensions.  Typically these provide +1 capacity, but the slide will not lock back on the last shot.* Due to State...

Spare Parts - Floorplate Spares Kit

Designed for basepads using our locking plate system. Includes 5 spare screws 2 spare retaining plates Allen wrench to match your equipment. In the "special instructions" field at checkout, please specify: Which basepad you need parts for.