Mag Extensions

Wolff Guide Rod Spring - Colt Commander .45 - 15lb

Use with your upgraded guide rods.

WOLFF SPRING for +3 to +5 Canik, M&P, Old HK VP9/P30, HK 45 140mm extensions

Replacement spring for +3 to +5 Canik, M&P, Old HK VP9/P30, and HK 45 . (USPSA shooters, if you have 140mm mags, this is the spring you're looking for.) Custom made for TF by Wolff Gunsprings. Due to U.S. State Department restrictions, we cannot ship...

Wolff/TF Spring for Remington / Para - 13 Coil

Replacement spring for Remington / Para-Ordnance magazines, custom-made for us by Wolff Gunsprings. Ideal for use with our 140mm extensions. (13 coil, P-pattern) NOTE: Does NOT fit the Rock Island follower. 

Wolff/TF Spring for Glock - Goliath XL - 34 coil

Replacement spring for our Glock Goliath XL extension kit. Use this spring with our Glock Goliath XL extension on a Glock 31-round magazine to create a 61+1 combination. (Excellent for carbines.) DISCLAIMER: This product is not manufactured, authorized,...

Bling Floorplate for Glock - Alum - Black

Our "Bling" floorplates are just that, something to add a little attitude to the look of your production Glock. We cut a near-copy of the factory floorplate out of plate aluminum, black-anodized it, then cut our TF logo through the black finish, so the...

TF/Wolff Goliath Spring for Glock - 28 coil

Replacement spring for our Glock Goliath extension kit. Use this spring with our Glock Goliath extension on a Glock 31-round magazine to create a 51+1 combination. (Excellent for carbines.)

Sight Block - Low Profile for Glock 9mm - Black

Sight Block cut to fit any 9mm Glock. Replaces the thread protector on standard-length threaded Glock barrels (Glock 17, 19, 34, 17L). Includes vial of high-temperature thread-locking compound (no set screws are used). Picture at right shows a Glock 43...

TF/Wolff Spring for Glock +4 (45 acp, 12-coil)

Replacement spring for our Glock +4 for 45 basepad. (Does not work with the G20.) DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK...

TF/Wolff Spring for Sig 320 and HK VP9/P30 +5 (13 coil)

Replacement spring for Sig 320 140mm magazine spring.     ALSO WORKS ON SAR 9.   Due to state department restrictions, we cannot ship this part internationally without special permits.

TF/Wolff Spring for +10 for Scorpion / Colt Tavor (21-coil G pattern, no small coils)

Replacement spring for our CZ Scorpion +10 system. Custom-made (by Wolff) to our specifications. Due to U.S. State Department restrictions, we cannot ship this part internationally.

TF/Wolff Spring for Sig MPX +20 (22-coil M-pattern, no small coils)

Replacement Spring for SIG MPX +20 Basepad. Custom-made to our specifications. Due to State Department restictions we cannot ship this part internationally.

TF/Wolff Spring for Glock 41+1 (22-coil)

Replacement spring for our Glock 41+1 extension kit, custom-made (by Wolff) to our specifications. Use this spring with our Glock +12 extension on a Glock 31-round magazine to create a 41+1 combination. (Excellent for carbines.)   Due to U.S. State...

TF/Wolff Spring for M&P +10, Canik +9, Rock Island HC 1911, (14-coil)

Replacement spring for 170mm S&W M&P extension kit and Canik 170mm extension kit. Brown in color, required to make 170mm-equipped magazine function. Custom-made for Taylor Freelance by Wolff Gunsprings. This spring also works on Rock Island-built...

TF/Wolff Spring for Glock +8/10/12, Walther +12 (14-coil G-pattern)

Replacement spring for Glock +8/10/12 kit. Also works for Walther PPQ +12. Brown in color, custom-made for us by Wolff Gunsprings. Due to U.S. State Department restrictions, we cannot ship this part internationally.

TF/Wolff Spring for CZ +5 (12-coil M-pattern)

The CZ75 SP01 can use springs intended for the Glock. The spring we offer is the same one we offer for our Glock 140mm basepads -- heavier than stock, longer than stock, custom-wound for us by Wolff Gunsprings. *Due to US State Department restrictions,...

TF/Wolff SPRING FOR Glock +5, Walther +3, +6 (12-coil G-pattern)

Replacement spring for the Glock +5 140mm floorplate (works in 9mm, .40 S&W, and .357 SIG guns). Also works for Walther PPQ +6. Brown in color, longer than stock, custom-made for us by Wolff Gunsprings. Due to U.S. State Department restrictions, we...

TF/Wolff SPRING FOR GLOCK +4 (.45ACP) 140MM FLOORPLATE (12-coil .45)

Replacement spring for the Glock +4 140mm floorplate (works in .45 ACP guns only). Brown in color, longer than stock, custom-made for us by Wolff Gunsprings. Due to U.S. State Department restrictions, we cannot ship this part internationally.

TF/Wolff SPRING FOR 140MM XDM (12-coil XDM)

Custom-made for us by Wolff Gunsprings, our springs are heavier and longer than stock, providing optimal function with the stock magazine parts (including positive slide lock-back).

Sight Block For Glock 9mm - Alum - Black

Convert your Glock 17 to an extended-barrel racegun with our Glock sight block. Designed to run with the Lone Wolf threaded barrel for the Glock 34, the sight block instantly gives your standard Glock 17 the sight radius of the famed 6" Glock 17L. That's...

+4 .45 Basepad w/spring for Glock - Delrin

Extend your Glock 21/41 from 13, to a full 17 rounds of firepower! Built for USPSA's "Limited" Division, the finished magazine is 140mm long, as measured down the back (versus about 120mm stock). Also works (as a +5!) on the 10mm G20 -- but the newest...

+3 Supercap Basepad for Glock - Alum - Red

Turn your Glock 22-round .40 into a 25! Shooters running .40 S&W Glocks in USPSA's "Open" Division contacted us about extending Glock's new 22-round magazine (about 160mm long) out to 170mm. The result is the "Supercap" -- a slick little +3 that is...

+3 Supercap Basepad for Glock - Delrin

Turn your Glock 22-round .40 into a 25! Shooters running .40 S&W Glocks in USPSA's "Open" Division contacted us about extending Glock's new 22-round magazine (about 160mm long) out to 170mm. The result is the "Supercap" -- a slick little +3 that is...

9/40 Speedwedge for Glock - Brass - Shiny

Makes the magazine easier to load, helps it to fall clear when empty, and the weight calms down the recoil. Very nice part. Perfect for USPSA's NEW Production Division rules! Also perfect for USPSA's "Limited-10" division, and for anyone required to use...

10/45 Speedwedge for Glock - Brass - Shiny

Makes the magazine easier to load, helps it to fall clear when empty, and the weight calms down the recoil. Very nice part. Perfect for USPSA's NEW Production Division rules! Also perfect for USPSA's "Limited-10" division, and for anyone required to use...