Product Description
Sig P365 Xmacro +4, 30th Anniversary Model
-
Optimized for the SIG X-series grip frame.
-
Works on the Classic grip with minor fitting (clearance for the locking wedge).
-
Brass version unusually heavy 4+ ounces!
-
22+1 stock, 23+1 with a low-profile follower
- Toolless assembly/disassembly
- Super-strong lockup
- "Grippy" sides for non-slip handling
- 140mm USPSA legal
- 100% user serviceable "down the smallest part"
To commemorate our 30th, TF's design team put our heads together to design what we felt was the best basepad we could make. Regardless of cost, we wanted it to be THE BEST.
It's toolless, super-grippy on the sides, stands up on its back (for rapid table starts), and is completely user-serviceable. You can take it completely apart with no tools, right down to the smallest internal spring. The locking system is self-lubricating, and the locking block is crazy strong. (The design was inspired by the Ruger Mark II magazine.)
The sharp-cornered, angular look includes ribs that have 90-degree corners. Those corners offer industy-leading traction, for fumble-free mag grabs.
CAUTION: In our limited testing, the aluminum grip frame made by AXG will allow magazines to overpenetrate when using these basepads.
Weight: 1 ounces
Material: Aluminum
Color: Gold
NOTE: SIG 365 Macro magazines accept plus-capacity basepads intended for the Canik. Some minor fitting of the locking wedge or locking screw may be helpful -- but is generally not necessary.
NOTE: Due to state department restrictions we cannot ship this part internationally.
