Product Description
Designed for USPSA's demanding "Limited Division" our 140mm provides +3 rounds of .45, with rock-solid retention and security. New "black magic" retainer allows quick disassembly. Just loosen the two screws and the locking plate pivots out of the way. Package ships with custom spring. Additional springs are available under "springs and misc."
"HIGH CAPACITY" WARNING: This product may not be legal in certain states due to its ability to convert "low-capacity" magazines into so-called "high-capacity" magazines (holding 11+ cartridges). Please check the laws of your state before purchasing.
Washington State Residents: As above, orders including this product that are being shipped to Washington will be voided. For more information, contact support@
Note: Due to U.S. State Department restrictions, we cannot ship this part internationally.
Product Videos
Custom Field
Product Reviews
7 Reviews Hide Reviews Show Reviews
-
Excellent
+5 in 10mm - quality/fit and finish are excellent, and the appearance is clean and not "busy" like some others - I did lightly file the rear edge and bevel rear bottom of follower legs as suggested to ensure smooth loading - overall, very pleased with these.
-
Springfield 45/10mm 3+/5+ extension
Good stuff. That little tab on the mag has to filed or grinded or mag follower will get stuck.
-
A Little work makes it a +5 10mm baseplate
On hearing that the 10mm M&P was based on the .45 frame, I decided to buy one of these just to see what would happen. I had to lightly deburr the back lip of the baseplate with a file to get the follower to slide over the interface consistently, but once it worked, it turned the 15rd magazine into 20rds of 10mm and I haven't experienced any magazine based jams yet, just rough ammo and underpowered factory recoil spring stuff; well worth the effort, and I can't knock of a star for that considering I was intentionally using it incorrectly. I'll likely purchase a few more and install whenever magazines become available again and see if they continue to work.
-
Great Product
I got to see it it would work on a aftermarket mag. Worked great, very pleased with all of Taylor Freelance products. They ship them out quickly and vary good prices.
-
Update since last review
Long story short i was offered a full refund. Turned that offer down and was offered to send the assembly in and have them work it over. They got it to work properly as advertised and let me know what they did and sent it back. Turns out my mags are just wierd oem models. Could not be happier, just ordered another one.
-
Worst experience ive had in a while
I have fought this for hours with multiple attempts of modifications and to the point my thumbs are bruising from working rounds in and out of the magazine. And product support was no help whatsoever. So now ive wasted almost 50 bucks and hours of my time to barely fit +2. Im trying other companies for the rest of my mags. --- Nick, you can't waste $50 with us -- send it back for a full refund!
-
M&P 45 +3 basepad
Works great. Some sanding of the follower was required, but easy enough to do. I'd Buy another.
