Quick view Details GRAMS SPRING/FOLLOWER KIT, FKC-11, 140MM CZ-75 SMALL FRAME, SP01 MSRP: Now: $18.90 Add to Cart Compare Quick view Details GRAMS SPRING/FOLLOWER KIT, FKCL-11, 140MM CZ TAC SPORT MSRP: Now: $18.90 Out of stock Compare Quick view Details Grams Spring/Follower Kit, FKCL-13, CZ Large frame, upto 171mm mag MSRP: Now: $18.90 Add to Cart Compare Quick view Details GRAMS SPRING/FOLLOWER KIT, FKCMG11,140MM MEC-GAR CZ-75 SML FRAME, SP01 MSRP: Now: $18.90 Out of stock Compare Quick view Details GRAMS SPRING/FOLLOWER KIT, FKK38-11, TANFOGLIO 140MM LONG FORMAT MSRP: Now: $18.90 Add to Cart Compare Quick view Details GRAMS SPRING/FOLLOWER KIT, FKK40-11, TANFOGLIO 140MM K-TYPE 40 S&W MSRP: Now: $18.90 Add to Cart Compare Quick view Details GRAMS SPRING/FOLLOWER KIT, FKK9-11, TANFOGLIO 140MM K-TYPE 9MM, MSRP: Now: $18.90 Out of stock Compare Quick view Details GRAMS SPRING/FOLLOWER KIT, FKK9-13, 170MM TANFOGLIO K-TYPE MSRP: Now: $18.90 Add to Cart Compare Quick view Details Grams Spring/Follower Kit, FKS9-11, STI Mags (Gen 1), MSRP: Now: $18.90 Out of stock Compare Quick view Details GRAMS Spring/Follower Kit, FKSGP-11, P320/P250, 9mm/40SW, MSRP: Now: $18.90 Out of stock Compare Quick view Details GRAMS SPRING/FOLLOWER KIT, FKXM-11, 140MM XDM MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKC-11, 140MM CZ-75 SMALL FRAME, SP01 Grams spring for 140mm magazines (Limited division) for Tanfoglio and CZ small-frame pistols. (9mm, .40) Typically these provide +1 capacity, but the slide will not lock back on the last shot. ... MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKCL-11, 140MM CZ TAC SPORT Made especially for CZ Tactical Sport by Grams Engineering, these provide maximum capacity and optimal spring strength for our extensions. Typically these provide +1 capacity, but the slide... MSRP: Now: $18.90 Out of stock Compare Quick view Grams Spring/Follower Kit, FKCL-13, CZ Large frame, upto 171mm mag Follower Kit for CZ Large fram 9mm/.40 mags (Tactical Sport/CZechmate). Designed for mag OAL that measure up to 171mm long, (includes Grams Format Follower (CL) & 13 coil spring. MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKCMG11,140MM MEC-GAR CZ-75 SML FRAME, SP01 Made especially for the MEC-GAR aftermarket magazine for small-frame CZ-75's (including the SP01). Made by Grams Engineering, these provide maximum capacity and optimal spring strength for our +5+... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK38-11, TANFOGLIO 140MM LONG FORMAT Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the standard (long format) Tanfoglio magazine with NO spacer plate down the... MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK40-11, TANFOGLIO 140MM K-TYPE 40 S&W Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The... MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK9-11, TANFOGLIO 140MM K-TYPE 9MM, Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK9-13, 170MM TANFOGLIO K-TYPE Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The... MSRP: Now: $18.90 Add to Cart Compare Quick view Grams Spring/Follower Kit, FKS9-11, STI Mags (Gen 1), Maximize capacity in the STI, AND (curiously) the Walther PPQ! Using this spring/follower kit together with one of our Walther PPQ +6 extensions can increase your firepower from +6 to as much as +8!... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS Spring/Follower Kit, FKSGP-11, P320/P250, 9mm/40SW, Spring / Follower kit designed for Sig Sauer P320/P250, 9mm/40SW. Can be used with mag OAL that measure up to 145mm long, (includes Grams Format Follower (SGP & 11 coil spring). NOTE:... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKXM-11, 140MM XDM Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the 9/.40 Springfield XDM magazine. The attached spring has 11 coils, and is... MSRP: Now: $18.90 Add to Cart Compare Compare Selected × OK Please sure email addresses are correct before adding to cart!
Quick view Details GRAMS SPRING/FOLLOWER KIT, FKCL-11, 140MM CZ TAC SPORT MSRP: Now: $18.90 Out of stock Compare Quick view Details Grams Spring/Follower Kit, FKCL-13, CZ Large frame, upto 171mm mag MSRP: Now: $18.90 Add to Cart Compare Quick view Details GRAMS SPRING/FOLLOWER KIT, FKCMG11,140MM MEC-GAR CZ-75 SML FRAME, SP01 MSRP: Now: $18.90 Out of stock Compare Quick view Details GRAMS SPRING/FOLLOWER KIT, FKK38-11, TANFOGLIO 140MM LONG FORMAT MSRP: Now: $18.90 Add to Cart Compare Quick view Details GRAMS SPRING/FOLLOWER KIT, FKK40-11, TANFOGLIO 140MM K-TYPE 40 S&W MSRP: Now: $18.90 Add to Cart Compare Quick view Details GRAMS SPRING/FOLLOWER KIT, FKK9-11, TANFOGLIO 140MM K-TYPE 9MM, MSRP: Now: $18.90 Out of stock Compare Quick view Details GRAMS SPRING/FOLLOWER KIT, FKK9-13, 170MM TANFOGLIO K-TYPE MSRP: Now: $18.90 Add to Cart Compare Quick view Details Grams Spring/Follower Kit, FKS9-11, STI Mags (Gen 1), MSRP: Now: $18.90 Out of stock Compare Quick view Details GRAMS Spring/Follower Kit, FKSGP-11, P320/P250, 9mm/40SW, MSRP: Now: $18.90 Out of stock Compare Quick view Details GRAMS SPRING/FOLLOWER KIT, FKXM-11, 140MM XDM MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKC-11, 140MM CZ-75 SMALL FRAME, SP01 Grams spring for 140mm magazines (Limited division) for Tanfoglio and CZ small-frame pistols. (9mm, .40) Typically these provide +1 capacity, but the slide will not lock back on the last shot. ... MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKCL-11, 140MM CZ TAC SPORT Made especially for CZ Tactical Sport by Grams Engineering, these provide maximum capacity and optimal spring strength for our extensions. Typically these provide +1 capacity, but the slide... MSRP: Now: $18.90 Out of stock Compare Quick view Grams Spring/Follower Kit, FKCL-13, CZ Large frame, upto 171mm mag Follower Kit for CZ Large fram 9mm/.40 mags (Tactical Sport/CZechmate). Designed for mag OAL that measure up to 171mm long, (includes Grams Format Follower (CL) & 13 coil spring. MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKCMG11,140MM MEC-GAR CZ-75 SML FRAME, SP01 Made especially for the MEC-GAR aftermarket magazine for small-frame CZ-75's (including the SP01). Made by Grams Engineering, these provide maximum capacity and optimal spring strength for our +5+... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK38-11, TANFOGLIO 140MM LONG FORMAT Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the standard (long format) Tanfoglio magazine with NO spacer plate down the... MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK40-11, TANFOGLIO 140MM K-TYPE 40 S&W Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The... MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK9-11, TANFOGLIO 140MM K-TYPE 9MM, Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK9-13, 170MM TANFOGLIO K-TYPE Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The... MSRP: Now: $18.90 Add to Cart Compare Quick view Grams Spring/Follower Kit, FKS9-11, STI Mags (Gen 1), Maximize capacity in the STI, AND (curiously) the Walther PPQ! Using this spring/follower kit together with one of our Walther PPQ +6 extensions can increase your firepower from +6 to as much as +8!... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS Spring/Follower Kit, FKSGP-11, P320/P250, 9mm/40SW, Spring / Follower kit designed for Sig Sauer P320/P250, 9mm/40SW. Can be used with mag OAL that measure up to 145mm long, (includes Grams Format Follower (SGP & 11 coil spring). NOTE:... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKXM-11, 140MM XDM Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the 9/.40 Springfield XDM magazine. The attached spring has 11 coils, and is... MSRP: Now: $18.90 Add to Cart Compare Compare Selected × OK Please sure email addresses are correct before adding to cart!
Quick view Details Grams Spring/Follower Kit, FKCL-13, CZ Large frame, upto 171mm mag MSRP: Now: $18.90 Add to Cart Compare Quick view Details GRAMS SPRING/FOLLOWER KIT, FKCMG11,140MM MEC-GAR CZ-75 SML FRAME, SP01 MSRP: Now: $18.90 Out of stock Compare Quick view Details GRAMS SPRING/FOLLOWER KIT, FKK38-11, TANFOGLIO 140MM LONG FORMAT MSRP: Now: $18.90 Add to Cart Compare Quick view Details GRAMS SPRING/FOLLOWER KIT, FKK40-11, TANFOGLIO 140MM K-TYPE 40 S&W MSRP: Now: $18.90 Add to Cart Compare Quick view Details GRAMS SPRING/FOLLOWER KIT, FKK9-11, TANFOGLIO 140MM K-TYPE 9MM, MSRP: Now: $18.90 Out of stock Compare Quick view Details GRAMS SPRING/FOLLOWER KIT, FKK9-13, 170MM TANFOGLIO K-TYPE MSRP: Now: $18.90 Add to Cart Compare Quick view Details Grams Spring/Follower Kit, FKS9-11, STI Mags (Gen 1), MSRP: Now: $18.90 Out of stock Compare Quick view Details GRAMS Spring/Follower Kit, FKSGP-11, P320/P250, 9mm/40SW, MSRP: Now: $18.90 Out of stock Compare Quick view Details GRAMS SPRING/FOLLOWER KIT, FKXM-11, 140MM XDM MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKC-11, 140MM CZ-75 SMALL FRAME, SP01 Grams spring for 140mm magazines (Limited division) for Tanfoglio and CZ small-frame pistols. (9mm, .40) Typically these provide +1 capacity, but the slide will not lock back on the last shot. ... MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKCL-11, 140MM CZ TAC SPORT Made especially for CZ Tactical Sport by Grams Engineering, these provide maximum capacity and optimal spring strength for our extensions. Typically these provide +1 capacity, but the slide... MSRP: Now: $18.90 Out of stock Compare Quick view Grams Spring/Follower Kit, FKCL-13, CZ Large frame, upto 171mm mag Follower Kit for CZ Large fram 9mm/.40 mags (Tactical Sport/CZechmate). Designed for mag OAL that measure up to 171mm long, (includes Grams Format Follower (CL) & 13 coil spring. MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKCMG11,140MM MEC-GAR CZ-75 SML FRAME, SP01 Made especially for the MEC-GAR aftermarket magazine for small-frame CZ-75's (including the SP01). Made by Grams Engineering, these provide maximum capacity and optimal spring strength for our +5+... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK38-11, TANFOGLIO 140MM LONG FORMAT Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the standard (long format) Tanfoglio magazine with NO spacer plate down the... MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK40-11, TANFOGLIO 140MM K-TYPE 40 S&W Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The... MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK9-11, TANFOGLIO 140MM K-TYPE 9MM, Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK9-13, 170MM TANFOGLIO K-TYPE Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The... MSRP: Now: $18.90 Add to Cart Compare Quick view Grams Spring/Follower Kit, FKS9-11, STI Mags (Gen 1), Maximize capacity in the STI, AND (curiously) the Walther PPQ! Using this spring/follower kit together with one of our Walther PPQ +6 extensions can increase your firepower from +6 to as much as +8!... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS Spring/Follower Kit, FKSGP-11, P320/P250, 9mm/40SW, Spring / Follower kit designed for Sig Sauer P320/P250, 9mm/40SW. Can be used with mag OAL that measure up to 145mm long, (includes Grams Format Follower (SGP & 11 coil spring). NOTE:... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKXM-11, 140MM XDM Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the 9/.40 Springfield XDM magazine. The attached spring has 11 coils, and is... MSRP: Now: $18.90 Add to Cart Compare Compare Selected × OK Please sure email addresses are correct before adding to cart!
Quick view Details GRAMS SPRING/FOLLOWER KIT, FKCMG11,140MM MEC-GAR CZ-75 SML FRAME, SP01 MSRP: Now: $18.90 Out of stock Compare Quick view Details GRAMS SPRING/FOLLOWER KIT, FKK38-11, TANFOGLIO 140MM LONG FORMAT MSRP: Now: $18.90 Add to Cart Compare Quick view Details GRAMS SPRING/FOLLOWER KIT, FKK40-11, TANFOGLIO 140MM K-TYPE 40 S&W MSRP: Now: $18.90 Add to Cart Compare Quick view Details GRAMS SPRING/FOLLOWER KIT, FKK9-11, TANFOGLIO 140MM K-TYPE 9MM, MSRP: Now: $18.90 Out of stock Compare Quick view Details GRAMS SPRING/FOLLOWER KIT, FKK9-13, 170MM TANFOGLIO K-TYPE MSRP: Now: $18.90 Add to Cart Compare Quick view Details Grams Spring/Follower Kit, FKS9-11, STI Mags (Gen 1), MSRP: Now: $18.90 Out of stock Compare Quick view Details GRAMS Spring/Follower Kit, FKSGP-11, P320/P250, 9mm/40SW, MSRP: Now: $18.90 Out of stock Compare Quick view Details GRAMS SPRING/FOLLOWER KIT, FKXM-11, 140MM XDM MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKC-11, 140MM CZ-75 SMALL FRAME, SP01 Grams spring for 140mm magazines (Limited division) for Tanfoglio and CZ small-frame pistols. (9mm, .40) Typically these provide +1 capacity, but the slide will not lock back on the last shot. ... MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKCL-11, 140MM CZ TAC SPORT Made especially for CZ Tactical Sport by Grams Engineering, these provide maximum capacity and optimal spring strength for our extensions. Typically these provide +1 capacity, but the slide... MSRP: Now: $18.90 Out of stock Compare Quick view Grams Spring/Follower Kit, FKCL-13, CZ Large frame, upto 171mm mag Follower Kit for CZ Large fram 9mm/.40 mags (Tactical Sport/CZechmate). Designed for mag OAL that measure up to 171mm long, (includes Grams Format Follower (CL) & 13 coil spring. MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKCMG11,140MM MEC-GAR CZ-75 SML FRAME, SP01 Made especially for the MEC-GAR aftermarket magazine for small-frame CZ-75's (including the SP01). Made by Grams Engineering, these provide maximum capacity and optimal spring strength for our +5+... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK38-11, TANFOGLIO 140MM LONG FORMAT Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the standard (long format) Tanfoglio magazine with NO spacer plate down the... MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK40-11, TANFOGLIO 140MM K-TYPE 40 S&W Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The... MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK9-11, TANFOGLIO 140MM K-TYPE 9MM, Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK9-13, 170MM TANFOGLIO K-TYPE Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The... MSRP: Now: $18.90 Add to Cart Compare Quick view Grams Spring/Follower Kit, FKS9-11, STI Mags (Gen 1), Maximize capacity in the STI, AND (curiously) the Walther PPQ! Using this spring/follower kit together with one of our Walther PPQ +6 extensions can increase your firepower from +6 to as much as +8!... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS Spring/Follower Kit, FKSGP-11, P320/P250, 9mm/40SW, Spring / Follower kit designed for Sig Sauer P320/P250, 9mm/40SW. Can be used with mag OAL that measure up to 145mm long, (includes Grams Format Follower (SGP & 11 coil spring). NOTE:... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKXM-11, 140MM XDM Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the 9/.40 Springfield XDM magazine. The attached spring has 11 coils, and is... MSRP: Now: $18.90 Add to Cart Compare Compare Selected × OK Please sure email addresses are correct before adding to cart!
Quick view Details GRAMS SPRING/FOLLOWER KIT, FKK38-11, TANFOGLIO 140MM LONG FORMAT MSRP: Now: $18.90 Add to Cart Compare Quick view Details GRAMS SPRING/FOLLOWER KIT, FKK40-11, TANFOGLIO 140MM K-TYPE 40 S&W MSRP: Now: $18.90 Add to Cart Compare Quick view Details GRAMS SPRING/FOLLOWER KIT, FKK9-11, TANFOGLIO 140MM K-TYPE 9MM, MSRP: Now: $18.90 Out of stock Compare Quick view Details GRAMS SPRING/FOLLOWER KIT, FKK9-13, 170MM TANFOGLIO K-TYPE MSRP: Now: $18.90 Add to Cart Compare Quick view Details Grams Spring/Follower Kit, FKS9-11, STI Mags (Gen 1), MSRP: Now: $18.90 Out of stock Compare Quick view Details GRAMS Spring/Follower Kit, FKSGP-11, P320/P250, 9mm/40SW, MSRP: Now: $18.90 Out of stock Compare Quick view Details GRAMS SPRING/FOLLOWER KIT, FKXM-11, 140MM XDM MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKC-11, 140MM CZ-75 SMALL FRAME, SP01 Grams spring for 140mm magazines (Limited division) for Tanfoglio and CZ small-frame pistols. (9mm, .40) Typically these provide +1 capacity, but the slide will not lock back on the last shot. ... MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKCL-11, 140MM CZ TAC SPORT Made especially for CZ Tactical Sport by Grams Engineering, these provide maximum capacity and optimal spring strength for our extensions. Typically these provide +1 capacity, but the slide... MSRP: Now: $18.90 Out of stock Compare Quick view Grams Spring/Follower Kit, FKCL-13, CZ Large frame, upto 171mm mag Follower Kit for CZ Large fram 9mm/.40 mags (Tactical Sport/CZechmate). Designed for mag OAL that measure up to 171mm long, (includes Grams Format Follower (CL) & 13 coil spring. MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKCMG11,140MM MEC-GAR CZ-75 SML FRAME, SP01 Made especially for the MEC-GAR aftermarket magazine for small-frame CZ-75's (including the SP01). Made by Grams Engineering, these provide maximum capacity and optimal spring strength for our +5+... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK38-11, TANFOGLIO 140MM LONG FORMAT Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the standard (long format) Tanfoglio magazine with NO spacer plate down the... MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK40-11, TANFOGLIO 140MM K-TYPE 40 S&W Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The... MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK9-11, TANFOGLIO 140MM K-TYPE 9MM, Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK9-13, 170MM TANFOGLIO K-TYPE Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The... MSRP: Now: $18.90 Add to Cart Compare Quick view Grams Spring/Follower Kit, FKS9-11, STI Mags (Gen 1), Maximize capacity in the STI, AND (curiously) the Walther PPQ! Using this spring/follower kit together with one of our Walther PPQ +6 extensions can increase your firepower from +6 to as much as +8!... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS Spring/Follower Kit, FKSGP-11, P320/P250, 9mm/40SW, Spring / Follower kit designed for Sig Sauer P320/P250, 9mm/40SW. Can be used with mag OAL that measure up to 145mm long, (includes Grams Format Follower (SGP & 11 coil spring). NOTE:... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKXM-11, 140MM XDM Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the 9/.40 Springfield XDM magazine. The attached spring has 11 coils, and is... MSRP: Now: $18.90 Add to Cart Compare Compare Selected × OK Please sure email addresses are correct before adding to cart!
Quick view Details GRAMS SPRING/FOLLOWER KIT, FKK40-11, TANFOGLIO 140MM K-TYPE 40 S&W MSRP: Now: $18.90 Add to Cart Compare Quick view Details GRAMS SPRING/FOLLOWER KIT, FKK9-11, TANFOGLIO 140MM K-TYPE 9MM, MSRP: Now: $18.90 Out of stock Compare Quick view Details GRAMS SPRING/FOLLOWER KIT, FKK9-13, 170MM TANFOGLIO K-TYPE MSRP: Now: $18.90 Add to Cart Compare Quick view Details Grams Spring/Follower Kit, FKS9-11, STI Mags (Gen 1), MSRP: Now: $18.90 Out of stock Compare Quick view Details GRAMS Spring/Follower Kit, FKSGP-11, P320/P250, 9mm/40SW, MSRP: Now: $18.90 Out of stock Compare Quick view Details GRAMS SPRING/FOLLOWER KIT, FKXM-11, 140MM XDM MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKC-11, 140MM CZ-75 SMALL FRAME, SP01 Grams spring for 140mm magazines (Limited division) for Tanfoglio and CZ small-frame pistols. (9mm, .40) Typically these provide +1 capacity, but the slide will not lock back on the last shot. ... MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKCL-11, 140MM CZ TAC SPORT Made especially for CZ Tactical Sport by Grams Engineering, these provide maximum capacity and optimal spring strength for our extensions. Typically these provide +1 capacity, but the slide... MSRP: Now: $18.90 Out of stock Compare Quick view Grams Spring/Follower Kit, FKCL-13, CZ Large frame, upto 171mm mag Follower Kit for CZ Large fram 9mm/.40 mags (Tactical Sport/CZechmate). Designed for mag OAL that measure up to 171mm long, (includes Grams Format Follower (CL) & 13 coil spring. MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKCMG11,140MM MEC-GAR CZ-75 SML FRAME, SP01 Made especially for the MEC-GAR aftermarket magazine for small-frame CZ-75's (including the SP01). Made by Grams Engineering, these provide maximum capacity and optimal spring strength for our +5+... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK38-11, TANFOGLIO 140MM LONG FORMAT Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the standard (long format) Tanfoglio magazine with NO spacer plate down the... MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK40-11, TANFOGLIO 140MM K-TYPE 40 S&W Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The... MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK9-11, TANFOGLIO 140MM K-TYPE 9MM, Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK9-13, 170MM TANFOGLIO K-TYPE Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The... MSRP: Now: $18.90 Add to Cart Compare Quick view Grams Spring/Follower Kit, FKS9-11, STI Mags (Gen 1), Maximize capacity in the STI, AND (curiously) the Walther PPQ! Using this spring/follower kit together with one of our Walther PPQ +6 extensions can increase your firepower from +6 to as much as +8!... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS Spring/Follower Kit, FKSGP-11, P320/P250, 9mm/40SW, Spring / Follower kit designed for Sig Sauer P320/P250, 9mm/40SW. Can be used with mag OAL that measure up to 145mm long, (includes Grams Format Follower (SGP & 11 coil spring). NOTE:... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKXM-11, 140MM XDM Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the 9/.40 Springfield XDM magazine. The attached spring has 11 coils, and is... MSRP: Now: $18.90 Add to Cart Compare Compare Selected × OK Please sure email addresses are correct before adding to cart!
Quick view Details GRAMS SPRING/FOLLOWER KIT, FKK9-11, TANFOGLIO 140MM K-TYPE 9MM, MSRP: Now: $18.90 Out of stock Compare Quick view Details GRAMS SPRING/FOLLOWER KIT, FKK9-13, 170MM TANFOGLIO K-TYPE MSRP: Now: $18.90 Add to Cart Compare Quick view Details Grams Spring/Follower Kit, FKS9-11, STI Mags (Gen 1), MSRP: Now: $18.90 Out of stock Compare Quick view Details GRAMS Spring/Follower Kit, FKSGP-11, P320/P250, 9mm/40SW, MSRP: Now: $18.90 Out of stock Compare Quick view Details GRAMS SPRING/FOLLOWER KIT, FKXM-11, 140MM XDM MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKC-11, 140MM CZ-75 SMALL FRAME, SP01 Grams spring for 140mm magazines (Limited division) for Tanfoglio and CZ small-frame pistols. (9mm, .40) Typically these provide +1 capacity, but the slide will not lock back on the last shot. ... MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKCL-11, 140MM CZ TAC SPORT Made especially for CZ Tactical Sport by Grams Engineering, these provide maximum capacity and optimal spring strength for our extensions. Typically these provide +1 capacity, but the slide... MSRP: Now: $18.90 Out of stock Compare Quick view Grams Spring/Follower Kit, FKCL-13, CZ Large frame, upto 171mm mag Follower Kit for CZ Large fram 9mm/.40 mags (Tactical Sport/CZechmate). Designed for mag OAL that measure up to 171mm long, (includes Grams Format Follower (CL) & 13 coil spring. MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKCMG11,140MM MEC-GAR CZ-75 SML FRAME, SP01 Made especially for the MEC-GAR aftermarket magazine for small-frame CZ-75's (including the SP01). Made by Grams Engineering, these provide maximum capacity and optimal spring strength for our +5+... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK38-11, TANFOGLIO 140MM LONG FORMAT Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the standard (long format) Tanfoglio magazine with NO spacer plate down the... MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK40-11, TANFOGLIO 140MM K-TYPE 40 S&W Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The... MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK9-11, TANFOGLIO 140MM K-TYPE 9MM, Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK9-13, 170MM TANFOGLIO K-TYPE Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The... MSRP: Now: $18.90 Add to Cart Compare Quick view Grams Spring/Follower Kit, FKS9-11, STI Mags (Gen 1), Maximize capacity in the STI, AND (curiously) the Walther PPQ! Using this spring/follower kit together with one of our Walther PPQ +6 extensions can increase your firepower from +6 to as much as +8!... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS Spring/Follower Kit, FKSGP-11, P320/P250, 9mm/40SW, Spring / Follower kit designed for Sig Sauer P320/P250, 9mm/40SW. Can be used with mag OAL that measure up to 145mm long, (includes Grams Format Follower (SGP & 11 coil spring). NOTE:... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKXM-11, 140MM XDM Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the 9/.40 Springfield XDM magazine. The attached spring has 11 coils, and is... MSRP: Now: $18.90 Add to Cart Compare Compare Selected × OK Please sure email addresses are correct before adding to cart!
Quick view Details GRAMS SPRING/FOLLOWER KIT, FKK9-13, 170MM TANFOGLIO K-TYPE MSRP: Now: $18.90 Add to Cart Compare Quick view Details Grams Spring/Follower Kit, FKS9-11, STI Mags (Gen 1), MSRP: Now: $18.90 Out of stock Compare Quick view Details GRAMS Spring/Follower Kit, FKSGP-11, P320/P250, 9mm/40SW, MSRP: Now: $18.90 Out of stock Compare Quick view Details GRAMS SPRING/FOLLOWER KIT, FKXM-11, 140MM XDM MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKC-11, 140MM CZ-75 SMALL FRAME, SP01 Grams spring for 140mm magazines (Limited division) for Tanfoglio and CZ small-frame pistols. (9mm, .40) Typically these provide +1 capacity, but the slide will not lock back on the last shot. ... MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKCL-11, 140MM CZ TAC SPORT Made especially for CZ Tactical Sport by Grams Engineering, these provide maximum capacity and optimal spring strength for our extensions. Typically these provide +1 capacity, but the slide... MSRP: Now: $18.90 Out of stock Compare Quick view Grams Spring/Follower Kit, FKCL-13, CZ Large frame, upto 171mm mag Follower Kit for CZ Large fram 9mm/.40 mags (Tactical Sport/CZechmate). Designed for mag OAL that measure up to 171mm long, (includes Grams Format Follower (CL) & 13 coil spring. MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKCMG11,140MM MEC-GAR CZ-75 SML FRAME, SP01 Made especially for the MEC-GAR aftermarket magazine for small-frame CZ-75's (including the SP01). Made by Grams Engineering, these provide maximum capacity and optimal spring strength for our +5+... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK38-11, TANFOGLIO 140MM LONG FORMAT Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the standard (long format) Tanfoglio magazine with NO spacer plate down the... MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK40-11, TANFOGLIO 140MM K-TYPE 40 S&W Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The... MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK9-11, TANFOGLIO 140MM K-TYPE 9MM, Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK9-13, 170MM TANFOGLIO K-TYPE Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The... MSRP: Now: $18.90 Add to Cart Compare Quick view Grams Spring/Follower Kit, FKS9-11, STI Mags (Gen 1), Maximize capacity in the STI, AND (curiously) the Walther PPQ! Using this spring/follower kit together with one of our Walther PPQ +6 extensions can increase your firepower from +6 to as much as +8!... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS Spring/Follower Kit, FKSGP-11, P320/P250, 9mm/40SW, Spring / Follower kit designed for Sig Sauer P320/P250, 9mm/40SW. Can be used with mag OAL that measure up to 145mm long, (includes Grams Format Follower (SGP & 11 coil spring). NOTE:... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKXM-11, 140MM XDM Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the 9/.40 Springfield XDM magazine. The attached spring has 11 coils, and is... MSRP: Now: $18.90 Add to Cart Compare Compare Selected × OK Please sure email addresses are correct before adding to cart!
Quick view Details Grams Spring/Follower Kit, FKS9-11, STI Mags (Gen 1), MSRP: Now: $18.90 Out of stock Compare Quick view Details GRAMS Spring/Follower Kit, FKSGP-11, P320/P250, 9mm/40SW, MSRP: Now: $18.90 Out of stock Compare Quick view Details GRAMS SPRING/FOLLOWER KIT, FKXM-11, 140MM XDM MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKC-11, 140MM CZ-75 SMALL FRAME, SP01 Grams spring for 140mm magazines (Limited division) for Tanfoglio and CZ small-frame pistols. (9mm, .40) Typically these provide +1 capacity, but the slide will not lock back on the last shot. ... MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKCL-11, 140MM CZ TAC SPORT Made especially for CZ Tactical Sport by Grams Engineering, these provide maximum capacity and optimal spring strength for our extensions. Typically these provide +1 capacity, but the slide... MSRP: Now: $18.90 Out of stock Compare Quick view Grams Spring/Follower Kit, FKCL-13, CZ Large frame, upto 171mm mag Follower Kit for CZ Large fram 9mm/.40 mags (Tactical Sport/CZechmate). Designed for mag OAL that measure up to 171mm long, (includes Grams Format Follower (CL) & 13 coil spring. MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKCMG11,140MM MEC-GAR CZ-75 SML FRAME, SP01 Made especially for the MEC-GAR aftermarket magazine for small-frame CZ-75's (including the SP01). Made by Grams Engineering, these provide maximum capacity and optimal spring strength for our +5+... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK38-11, TANFOGLIO 140MM LONG FORMAT Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the standard (long format) Tanfoglio magazine with NO spacer plate down the... MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK40-11, TANFOGLIO 140MM K-TYPE 40 S&W Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The... MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK9-11, TANFOGLIO 140MM K-TYPE 9MM, Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK9-13, 170MM TANFOGLIO K-TYPE Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The... MSRP: Now: $18.90 Add to Cart Compare Quick view Grams Spring/Follower Kit, FKS9-11, STI Mags (Gen 1), Maximize capacity in the STI, AND (curiously) the Walther PPQ! Using this spring/follower kit together with one of our Walther PPQ +6 extensions can increase your firepower from +6 to as much as +8!... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS Spring/Follower Kit, FKSGP-11, P320/P250, 9mm/40SW, Spring / Follower kit designed for Sig Sauer P320/P250, 9mm/40SW. Can be used with mag OAL that measure up to 145mm long, (includes Grams Format Follower (SGP & 11 coil spring). NOTE:... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKXM-11, 140MM XDM Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the 9/.40 Springfield XDM magazine. The attached spring has 11 coils, and is... MSRP: Now: $18.90 Add to Cart Compare Compare Selected × OK Please sure email addresses are correct before adding to cart!
Quick view Details GRAMS Spring/Follower Kit, FKSGP-11, P320/P250, 9mm/40SW, MSRP: Now: $18.90 Out of stock Compare Quick view Details GRAMS SPRING/FOLLOWER KIT, FKXM-11, 140MM XDM MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKC-11, 140MM CZ-75 SMALL FRAME, SP01 Grams spring for 140mm magazines (Limited division) for Tanfoglio and CZ small-frame pistols. (9mm, .40) Typically these provide +1 capacity, but the slide will not lock back on the last shot. ... MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKCL-11, 140MM CZ TAC SPORT Made especially for CZ Tactical Sport by Grams Engineering, these provide maximum capacity and optimal spring strength for our extensions. Typically these provide +1 capacity, but the slide... MSRP: Now: $18.90 Out of stock Compare Quick view Grams Spring/Follower Kit, FKCL-13, CZ Large frame, upto 171mm mag Follower Kit for CZ Large fram 9mm/.40 mags (Tactical Sport/CZechmate). Designed for mag OAL that measure up to 171mm long, (includes Grams Format Follower (CL) & 13 coil spring. MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKCMG11,140MM MEC-GAR CZ-75 SML FRAME, SP01 Made especially for the MEC-GAR aftermarket magazine for small-frame CZ-75's (including the SP01). Made by Grams Engineering, these provide maximum capacity and optimal spring strength for our +5+... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK38-11, TANFOGLIO 140MM LONG FORMAT Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the standard (long format) Tanfoglio magazine with NO spacer plate down the... MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK40-11, TANFOGLIO 140MM K-TYPE 40 S&W Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The... MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK9-11, TANFOGLIO 140MM K-TYPE 9MM, Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK9-13, 170MM TANFOGLIO K-TYPE Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The... MSRP: Now: $18.90 Add to Cart Compare Quick view Grams Spring/Follower Kit, FKS9-11, STI Mags (Gen 1), Maximize capacity in the STI, AND (curiously) the Walther PPQ! Using this spring/follower kit together with one of our Walther PPQ +6 extensions can increase your firepower from +6 to as much as +8!... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS Spring/Follower Kit, FKSGP-11, P320/P250, 9mm/40SW, Spring / Follower kit designed for Sig Sauer P320/P250, 9mm/40SW. Can be used with mag OAL that measure up to 145mm long, (includes Grams Format Follower (SGP & 11 coil spring). NOTE:... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKXM-11, 140MM XDM Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the 9/.40 Springfield XDM magazine. The attached spring has 11 coils, and is... MSRP: Now: $18.90 Add to Cart Compare Compare Selected × OK Please sure email addresses are correct before adding to cart!
Quick view Details GRAMS SPRING/FOLLOWER KIT, FKXM-11, 140MM XDM MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKC-11, 140MM CZ-75 SMALL FRAME, SP01 Grams spring for 140mm magazines (Limited division) for Tanfoglio and CZ small-frame pistols. (9mm, .40) Typically these provide +1 capacity, but the slide will not lock back on the last shot. ... MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKCL-11, 140MM CZ TAC SPORT Made especially for CZ Tactical Sport by Grams Engineering, these provide maximum capacity and optimal spring strength for our extensions. Typically these provide +1 capacity, but the slide... MSRP: Now: $18.90 Out of stock Compare Quick view Grams Spring/Follower Kit, FKCL-13, CZ Large frame, upto 171mm mag Follower Kit for CZ Large fram 9mm/.40 mags (Tactical Sport/CZechmate). Designed for mag OAL that measure up to 171mm long, (includes Grams Format Follower (CL) & 13 coil spring. MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKCMG11,140MM MEC-GAR CZ-75 SML FRAME, SP01 Made especially for the MEC-GAR aftermarket magazine for small-frame CZ-75's (including the SP01). Made by Grams Engineering, these provide maximum capacity and optimal spring strength for our +5+... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK38-11, TANFOGLIO 140MM LONG FORMAT Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the standard (long format) Tanfoglio magazine with NO spacer plate down the... MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK40-11, TANFOGLIO 140MM K-TYPE 40 S&W Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The... MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK9-11, TANFOGLIO 140MM K-TYPE 9MM, Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK9-13, 170MM TANFOGLIO K-TYPE Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The... MSRP: Now: $18.90 Add to Cart Compare Quick view Grams Spring/Follower Kit, FKS9-11, STI Mags (Gen 1), Maximize capacity in the STI, AND (curiously) the Walther PPQ! Using this spring/follower kit together with one of our Walther PPQ +6 extensions can increase your firepower from +6 to as much as +8!... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS Spring/Follower Kit, FKSGP-11, P320/P250, 9mm/40SW, Spring / Follower kit designed for Sig Sauer P320/P250, 9mm/40SW. Can be used with mag OAL that measure up to 145mm long, (includes Grams Format Follower (SGP & 11 coil spring). NOTE:... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKXM-11, 140MM XDM Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the 9/.40 Springfield XDM magazine. The attached spring has 11 coils, and is... MSRP: Now: $18.90 Add to Cart Compare Compare Selected × OK Please sure email addresses are correct before adding to cart!
Quick view GRAMS SPRING/FOLLOWER KIT, FKC-11, 140MM CZ-75 SMALL FRAME, SP01 Grams spring for 140mm magazines (Limited division) for Tanfoglio and CZ small-frame pistols. (9mm, .40) Typically these provide +1 capacity, but the slide will not lock back on the last shot. ... MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKCL-11, 140MM CZ TAC SPORT Made especially for CZ Tactical Sport by Grams Engineering, these provide maximum capacity and optimal spring strength for our extensions. Typically these provide +1 capacity, but the slide... MSRP: Now: $18.90 Out of stock Compare Quick view Grams Spring/Follower Kit, FKCL-13, CZ Large frame, upto 171mm mag Follower Kit for CZ Large fram 9mm/.40 mags (Tactical Sport/CZechmate). Designed for mag OAL that measure up to 171mm long, (includes Grams Format Follower (CL) & 13 coil spring. MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKCMG11,140MM MEC-GAR CZ-75 SML FRAME, SP01 Made especially for the MEC-GAR aftermarket magazine for small-frame CZ-75's (including the SP01). Made by Grams Engineering, these provide maximum capacity and optimal spring strength for our +5+... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK38-11, TANFOGLIO 140MM LONG FORMAT Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the standard (long format) Tanfoglio magazine with NO spacer plate down the... MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK40-11, TANFOGLIO 140MM K-TYPE 40 S&W Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The... MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK9-11, TANFOGLIO 140MM K-TYPE 9MM, Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK9-13, 170MM TANFOGLIO K-TYPE Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The... MSRP: Now: $18.90 Add to Cart Compare Quick view Grams Spring/Follower Kit, FKS9-11, STI Mags (Gen 1), Maximize capacity in the STI, AND (curiously) the Walther PPQ! Using this spring/follower kit together with one of our Walther PPQ +6 extensions can increase your firepower from +6 to as much as +8!... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS Spring/Follower Kit, FKSGP-11, P320/P250, 9mm/40SW, Spring / Follower kit designed for Sig Sauer P320/P250, 9mm/40SW. Can be used with mag OAL that measure up to 145mm long, (includes Grams Format Follower (SGP & 11 coil spring). NOTE:... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKXM-11, 140MM XDM Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the 9/.40 Springfield XDM magazine. The attached spring has 11 coils, and is... MSRP: Now: $18.90 Add to Cart Compare Compare Selected × OK Please sure email addresses are correct before adding to cart!
Quick view GRAMS SPRING/FOLLOWER KIT, FKCL-11, 140MM CZ TAC SPORT Made especially for CZ Tactical Sport by Grams Engineering, these provide maximum capacity and optimal spring strength for our extensions. Typically these provide +1 capacity, but the slide... MSRP: Now: $18.90 Out of stock Compare Quick view Grams Spring/Follower Kit, FKCL-13, CZ Large frame, upto 171mm mag Follower Kit for CZ Large fram 9mm/.40 mags (Tactical Sport/CZechmate). Designed for mag OAL that measure up to 171mm long, (includes Grams Format Follower (CL) & 13 coil spring. MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKCMG11,140MM MEC-GAR CZ-75 SML FRAME, SP01 Made especially for the MEC-GAR aftermarket magazine for small-frame CZ-75's (including the SP01). Made by Grams Engineering, these provide maximum capacity and optimal spring strength for our +5+... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK38-11, TANFOGLIO 140MM LONG FORMAT Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the standard (long format) Tanfoglio magazine with NO spacer plate down the... MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK40-11, TANFOGLIO 140MM K-TYPE 40 S&W Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The... MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK9-11, TANFOGLIO 140MM K-TYPE 9MM, Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK9-13, 170MM TANFOGLIO K-TYPE Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The... MSRP: Now: $18.90 Add to Cart Compare Quick view Grams Spring/Follower Kit, FKS9-11, STI Mags (Gen 1), Maximize capacity in the STI, AND (curiously) the Walther PPQ! Using this spring/follower kit together with one of our Walther PPQ +6 extensions can increase your firepower from +6 to as much as +8!... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS Spring/Follower Kit, FKSGP-11, P320/P250, 9mm/40SW, Spring / Follower kit designed for Sig Sauer P320/P250, 9mm/40SW. Can be used with mag OAL that measure up to 145mm long, (includes Grams Format Follower (SGP & 11 coil spring). NOTE:... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKXM-11, 140MM XDM Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the 9/.40 Springfield XDM magazine. The attached spring has 11 coils, and is... MSRP: Now: $18.90 Add to Cart Compare Compare Selected × OK Please sure email addresses are correct before adding to cart!
Quick view Grams Spring/Follower Kit, FKCL-13, CZ Large frame, upto 171mm mag Follower Kit for CZ Large fram 9mm/.40 mags (Tactical Sport/CZechmate). Designed for mag OAL that measure up to 171mm long, (includes Grams Format Follower (CL) & 13 coil spring. MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKCMG11,140MM MEC-GAR CZ-75 SML FRAME, SP01 Made especially for the MEC-GAR aftermarket magazine for small-frame CZ-75's (including the SP01). Made by Grams Engineering, these provide maximum capacity and optimal spring strength for our +5+... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK38-11, TANFOGLIO 140MM LONG FORMAT Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the standard (long format) Tanfoglio magazine with NO spacer plate down the... MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK40-11, TANFOGLIO 140MM K-TYPE 40 S&W Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The... MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK9-11, TANFOGLIO 140MM K-TYPE 9MM, Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK9-13, 170MM TANFOGLIO K-TYPE Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The... MSRP: Now: $18.90 Add to Cart Compare Quick view Grams Spring/Follower Kit, FKS9-11, STI Mags (Gen 1), Maximize capacity in the STI, AND (curiously) the Walther PPQ! Using this spring/follower kit together with one of our Walther PPQ +6 extensions can increase your firepower from +6 to as much as +8!... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS Spring/Follower Kit, FKSGP-11, P320/P250, 9mm/40SW, Spring / Follower kit designed for Sig Sauer P320/P250, 9mm/40SW. Can be used with mag OAL that measure up to 145mm long, (includes Grams Format Follower (SGP & 11 coil spring). NOTE:... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKXM-11, 140MM XDM Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the 9/.40 Springfield XDM magazine. The attached spring has 11 coils, and is... MSRP: Now: $18.90 Add to Cart Compare Compare Selected × OK Please sure email addresses are correct before adding to cart!
Quick view GRAMS SPRING/FOLLOWER KIT, FKCMG11,140MM MEC-GAR CZ-75 SML FRAME, SP01 Made especially for the MEC-GAR aftermarket magazine for small-frame CZ-75's (including the SP01). Made by Grams Engineering, these provide maximum capacity and optimal spring strength for our +5+... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK38-11, TANFOGLIO 140MM LONG FORMAT Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the standard (long format) Tanfoglio magazine with NO spacer plate down the... MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK40-11, TANFOGLIO 140MM K-TYPE 40 S&W Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The... MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK9-11, TANFOGLIO 140MM K-TYPE 9MM, Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK9-13, 170MM TANFOGLIO K-TYPE Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The... MSRP: Now: $18.90 Add to Cart Compare Quick view Grams Spring/Follower Kit, FKS9-11, STI Mags (Gen 1), Maximize capacity in the STI, AND (curiously) the Walther PPQ! Using this spring/follower kit together with one of our Walther PPQ +6 extensions can increase your firepower from +6 to as much as +8!... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS Spring/Follower Kit, FKSGP-11, P320/P250, 9mm/40SW, Spring / Follower kit designed for Sig Sauer P320/P250, 9mm/40SW. Can be used with mag OAL that measure up to 145mm long, (includes Grams Format Follower (SGP & 11 coil spring). NOTE:... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKXM-11, 140MM XDM Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the 9/.40 Springfield XDM magazine. The attached spring has 11 coils, and is... MSRP: Now: $18.90 Add to Cart Compare Compare Selected × OK Please sure email addresses are correct before adding to cart!
Quick view GRAMS SPRING/FOLLOWER KIT, FKK38-11, TANFOGLIO 140MM LONG FORMAT Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the standard (long format) Tanfoglio magazine with NO spacer plate down the... MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK40-11, TANFOGLIO 140MM K-TYPE 40 S&W Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The... MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK9-11, TANFOGLIO 140MM K-TYPE 9MM, Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK9-13, 170MM TANFOGLIO K-TYPE Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The... MSRP: Now: $18.90 Add to Cart Compare Quick view Grams Spring/Follower Kit, FKS9-11, STI Mags (Gen 1), Maximize capacity in the STI, AND (curiously) the Walther PPQ! Using this spring/follower kit together with one of our Walther PPQ +6 extensions can increase your firepower from +6 to as much as +8!... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS Spring/Follower Kit, FKSGP-11, P320/P250, 9mm/40SW, Spring / Follower kit designed for Sig Sauer P320/P250, 9mm/40SW. Can be used with mag OAL that measure up to 145mm long, (includes Grams Format Follower (SGP & 11 coil spring). NOTE:... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKXM-11, 140MM XDM Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the 9/.40 Springfield XDM magazine. The attached spring has 11 coils, and is... MSRP: Now: $18.90 Add to Cart Compare Compare Selected × OK Please sure email addresses are correct before adding to cart!
Quick view GRAMS SPRING/FOLLOWER KIT, FKK40-11, TANFOGLIO 140MM K-TYPE 40 S&W Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The... MSRP: Now: $18.90 Add to Cart Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK9-11, TANFOGLIO 140MM K-TYPE 9MM, Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK9-13, 170MM TANFOGLIO K-TYPE Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The... MSRP: Now: $18.90 Add to Cart Compare Quick view Grams Spring/Follower Kit, FKS9-11, STI Mags (Gen 1), Maximize capacity in the STI, AND (curiously) the Walther PPQ! Using this spring/follower kit together with one of our Walther PPQ +6 extensions can increase your firepower from +6 to as much as +8!... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS Spring/Follower Kit, FKSGP-11, P320/P250, 9mm/40SW, Spring / Follower kit designed for Sig Sauer P320/P250, 9mm/40SW. Can be used with mag OAL that measure up to 145mm long, (includes Grams Format Follower (SGP & 11 coil spring). NOTE:... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKXM-11, 140MM XDM Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the 9/.40 Springfield XDM magazine. The attached spring has 11 coils, and is... MSRP: Now: $18.90 Add to Cart Compare Compare Selected × OK Please sure email addresses are correct before adding to cart!
Quick view GRAMS SPRING/FOLLOWER KIT, FKK9-11, TANFOGLIO 140MM K-TYPE 9MM, Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKK9-13, 170MM TANFOGLIO K-TYPE Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The... MSRP: Now: $18.90 Add to Cart Compare Quick view Grams Spring/Follower Kit, FKS9-11, STI Mags (Gen 1), Maximize capacity in the STI, AND (curiously) the Walther PPQ! Using this spring/follower kit together with one of our Walther PPQ +6 extensions can increase your firepower from +6 to as much as +8!... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS Spring/Follower Kit, FKSGP-11, P320/P250, 9mm/40SW, Spring / Follower kit designed for Sig Sauer P320/P250, 9mm/40SW. Can be used with mag OAL that measure up to 145mm long, (includes Grams Format Follower (SGP & 11 coil spring). NOTE:... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKXM-11, 140MM XDM Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the 9/.40 Springfield XDM magazine. The attached spring has 11 coils, and is... MSRP: Now: $18.90 Add to Cart Compare Compare Selected × OK Please sure email addresses are correct before adding to cart!
Quick view GRAMS SPRING/FOLLOWER KIT, FKK9-13, 170MM TANFOGLIO K-TYPE Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the K-type Tanfoglio magazine with the spacer plate down the back. The... MSRP: Now: $18.90 Add to Cart Compare Quick view Grams Spring/Follower Kit, FKS9-11, STI Mags (Gen 1), Maximize capacity in the STI, AND (curiously) the Walther PPQ! Using this spring/follower kit together with one of our Walther PPQ +6 extensions can increase your firepower from +6 to as much as +8!... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS Spring/Follower Kit, FKSGP-11, P320/P250, 9mm/40SW, Spring / Follower kit designed for Sig Sauer P320/P250, 9mm/40SW. Can be used with mag OAL that measure up to 145mm long, (includes Grams Format Follower (SGP & 11 coil spring). NOTE:... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKXM-11, 140MM XDM Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the 9/.40 Springfield XDM magazine. The attached spring has 11 coils, and is... MSRP: Now: $18.90 Add to Cart Compare Compare Selected × OK Please sure email addresses are correct before adding to cart!
Quick view Grams Spring/Follower Kit, FKS9-11, STI Mags (Gen 1), Maximize capacity in the STI, AND (curiously) the Walther PPQ! Using this spring/follower kit together with one of our Walther PPQ +6 extensions can increase your firepower from +6 to as much as +8!... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS Spring/Follower Kit, FKSGP-11, P320/P250, 9mm/40SW, Spring / Follower kit designed for Sig Sauer P320/P250, 9mm/40SW. Can be used with mag OAL that measure up to 145mm long, (includes Grams Format Follower (SGP & 11 coil spring). NOTE:... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKXM-11, 140MM XDM Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the 9/.40 Springfield XDM magazine. The attached spring has 11 coils, and is... MSRP: Now: $18.90 Add to Cart Compare Compare Selected × OK
Quick view GRAMS Spring/Follower Kit, FKSGP-11, P320/P250, 9mm/40SW, Spring / Follower kit designed for Sig Sauer P320/P250, 9mm/40SW. Can be used with mag OAL that measure up to 145mm long, (includes Grams Format Follower (SGP & 11 coil spring). NOTE:... MSRP: Now: $18.90 Out of stock Compare Quick view GRAMS SPRING/FOLLOWER KIT, FKXM-11, 140MM XDM Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the 9/.40 Springfield XDM magazine. The attached spring has 11 coils, and is... MSRP: Now: $18.90 Add to Cart Compare Compare Selected
Quick view GRAMS SPRING/FOLLOWER KIT, FKXM-11, 140MM XDM Grams Engineering's slick follower-and-spring kits typically add +1 round to your factory magazine capacity. This one fits the 9/.40 Springfield XDM magazine. The attached spring has 11 coils, and is... MSRP: Now: $18.90 Add to Cart Compare Compare Selected
